Specification
1 |
200mm tube door leaf frame |
2 |
top guide wheel |
3 |
top guide wheel pad |
4 |
top guide wheel screw |
5 |
bottom wheel |
6 |
bottom wheel bracket |
7 |
12A chain |
8 |
driving gear |
9 |
Motor shaft |
10 |
Motor fixing bracket |
11 |
Bottom cover |
12 |
ground rail |
13 |
Splint |
14 |
Splint screw |
15 |
50 angle iron |
16 |
Angle iron embedded screw |
17 |
Drainage frame |
18 |
Drain grate |
19 |
Door stop |
20 |
Top rail |
21 |
square tube hanging parts |
22 |
leaf panel |
23 |
U-shaped channel steel |
24 |
trolley wire |
25 |
Trolley wire bracket |
26 |
Collector wire |
27 |
Collector bracket |
28 |
Side seal |
29 |
Safty Protection System |
30 |
ABB Motors |
31 |
control box |
Design wind load according to typhoon level
Typhoon:
Level 12 is 32.4-36.9 m/s;
Level 13 is 37.0-41.4 m/s;
Level 14 is 41.5-46.1 m/s,
Level 15 is 46.2-50.9 m/s,
Level 16 is 51.0-56.0 m/s,
Level 17 is 56.1-61.2 m/s.
For any door member ,the deflection due to design wind load not exceed the member's length divided by 150.
Design Doors as a system to withstand the upward and downward deflections of the door header structure .